Whether you need assistance pulling or lifting heavy objects, the PCH2000 Portable Gas-Powered Pulling / Lifting Winch will do all the hard labor for you.
Powered by a durable and long lasting Honda GX160 cc gas engine, the PCH2000 Portable Winch can easily handle a variety of pulling and lifting operations in industrial, hunting, search and rescue, forestry, and arboriculture applications. Raise towers, antennas, and heavy insulator equipment ; pull cables, wires, boats, docks, water fences ; lift transformers, bricks, scaffolding ; and perform many other rugged jobs that involve lifting or pulling objects. The Portable Winch PCH2000 has a maximum pulling force of 2200 lbs. and rated lifting capacity of up to 990 lbs. Using a pulley system (not included) will double the rated lifting capacity to 1984 lbs.
The winch's unique and integrated rope grabbing system permits the user to work safely from the ground, while the start / stop mechanism makes it easy for the user to concentrate on the task being performed.
Pulling on the rope will activate the centrifugal clutch system. Once the user stops pulling, the throttle will return to idle, the drum will stop rotating (helping prevent rope damage), and the rope grabbing system will hold a load in position. This allows for the lifting and lowering of heavy loads.
See the Related Products section to find accessories for the PCH2000 Portable Gas-Powered Pulling / Lifting Winch. Some accessories allow the use of anchor points with your winch, such as ATVs, poles, pylons, etc.
Important: For lifting operations, the winch can be used with 1/2" diameter Double-Braided Polyester Rope as long as it contains eye splices and thimbles. Ropes that end in 'M2ESC' come with eye splices and thimbles. These ropes are mandatory for lifting operations with this PCH2000 Portable Winch. The only recommended diameter rope to be used is 1/2".
- Max. Pulling Force: 2200 lbs.
- Rated Lifting Capacity: 990 lbs.
- Pulling Speed: 72'/min
- Powered by a Honda GX-160 cc gasoline engine
- Aluminum alloy gearbox with heat treated 3-stage spur gears
- Gear Ratio: 53:1
- Centrifugal clutch system
- Double one-way bearing brake system
- Continuous work cycle
- Drum does NOT turn with engine idling
- Dimensions: 18" length x 14 5/8" width x 14 1/4" height
- Weight: 76 lbs.
- Includes PCA-1260 Polyester Sling (6' x 2")
- CE and M3 certified