Quick Teejet Nozzle Body w/ Check Valve for Wet Booms

Quick TeeJet Nozzle Body for wet booms. Available with clamp sizes for 1/2", 3/4" or 1" pipe.

Attach to round pipe. Drill hole in pipe and attach body, includes o-ring to make water tight seal. Check valve on body stop dripping nozzle after supply is shut off and reaches 10 psi.

These Quick TeeJet Nozzle Bodies can be used with Quick TeeJet Caps (see Related Products).

QJ17560A Features:

• ChemSaver drip-free shutoff. Requires 10 PSI at nozzle to open check valve
• Standard EPDM diaphragm
• All variations include a mounting hole in the upper clamp sub-assembly to mount to flat surfaces
• Max. Operating Pressure: 300 PSI
• Flow Rate at 5 PSI Pressure Drop: 2.25 GPM
• Flow Rate at 10 PSI Pressure Drop: 3.18 GPM

QJ22187-NYB Features:

• ChemSaver drip-free shutoff. Requires 10 PSI at nozzle to open check valve
• Permits side mounting to a flat surface to protect nozzle body
• 1/2" and 3/4" versions include a mounting hole in the upper clamp sub-assembly to mount to flat surfaces
• Standard EPDM diaphragm
• Max. Operating Pressure: 300 PSI
• Flow Rate at 5 PSI Pressure Drop: 2.5 GPM
• Flow Rate at 10 PSI Pressure Drop: 3.54 GPM

There is a chart in the Resources section that you will find especially useful for these Nozzle Bodies by TeeJet.