Electric PTO Clutches for Ferris Mowers

These Stens PTO Clutches are maintenance and adjustment free and are meant for residential and commercial applications for Ferris Mowers.

255-113 Electric PTO Clutch.

255-113 Electric PTO Clutch.

  • Electric PTO Clutch
    (255-113)
    CAD $674.44
  • Electric PTO Clutch
    (255-119)
    CAD $427.97
  • Electric PTO Clutch
    (255-383)
    CAD $480.61
  • Electric PTO Clutch
    (255-387)
    CAD $454.73
  • Electric PTO Clutch
    (255-527)
    CAD $594.62
  • Electric PTO Clutch
    (255-535)
    CAD $609.28

Details

These Stens Electric PTO Clutches are OEM spec and replaces Ferris PTO Clutches. They are designed for rugged use and made for residential and commercial applications. These PTO clutches have a One Year Warranty and are maintenance and adjustment free.

You must match up your existing PTO Clutch reference number exactly to the corresponding replacement Electric PTO Clutch. For proper ordering reference Ferris, Warner, or Ogura Part No. below in the chart.

Part # Replaces
Ferris #
Replaces
Warner #
Replaces
Ogura #
ID HT Pulley
Diameter
Direction Uses Belt
Width
255-113 5022590 / 5023232 / 22590 / 23232 GT2.5-FE02 1 1/8" 2 13/16" 6 1/8" 1/2" or 5/8"
255-119 5100417 53462700
GT1A-EH01
1 1/8" 3 1/4" 6" Counter
Clockwise
1/2" or 5/8"
255-383 1521823 / 21823 / 5021823 5215-13
5215-99
1" 3 1/2" 6" Clockwise 1/2" or 5/8"
255-387 1521083 / 5021083 / 21083 5215-14 1" 3 1/2" 6" Counter
Clockwise
1/2" or 5/8"
255-527 1521145 / 5021145 GT2.5-MC04
MA-GT-EXM14
1 1/8" 2 3/4" 6" 5/8"
255-535 1522040 5218-5
5218-70
5218-259
1 1/8" 3 1/4" 6 5/16" Clockwise 5/8"

Important:

If a clutch is mounted incorrectly then the springs will be run in compression and it will cause the springs to fail.

Generally, most applications that mount directly to the crankshaft use a counter clockwise rotation for standard mount (pulley away from engine). A clockwise rotation is normally used for reverse mounting (pulley towards engine).

In order for your PTO clutch to be installed properly you must torque correctly to prevent premature failure. You must allow both axial and radial free-play on the anti-rotation device. You must allow this free-play or resistance will be created resulting in field bearing failure.

When mounting bolt and retaining washer and torque for the clutch follow these specs. for it to work properly.

  1. Use Grade 5 or Grade 8 bolt only

Minimum Torque:

  1. 7/16" UNF bolt is 50ftlb/67 Nm
  2. 3/8" UNF bolt is 31ftlb/42 Nm
  3. M10x1.5 bolt is 35ftlb/48 Nm

Anything less than required mounting torque could result in clutch failure, thus voiding warranty.

Related Information

Customer Reviews

Write Your Own Review

You're reviewing: Electric PTO Clutches for Ferris Mowers

  • 1 star 2 stars 3 stars 4 stars 5 stars

* Required Fields