Xtreme Electric PTO Clutches for Exmark Mowers
Prices are in Canadian Dollars.
Overview
Stens OEM Replacement Xtreme PTO Clutches with cool coil technology for Exmark mowers.
Product Description
The Stens Xtreme Electric PTO Clutches listed in the chart below can be used as OEM replacements for existing PTO clutches on various Exmark lawn mowers. Refer to the chart below to find the right PTO clutch for your Exmark mower.
The new Stens line of Xtreme PTO Clutches come with:
- Cool coil technology - runs over 20% cooler than competitive clutches. Electromagnetic clutches run very hot, up to around 220° F. Xtreme composite coils run around 175° F. Less heat means extended life.
- High temperature bearing upgrades OR FatBoy bearing upgrades - high temperature bearings use a special blend of grease rated two times more than what is required for extended bearing life. Since high temperatures and vibration are tough on bearings, all Xtreme clutches use this blend of high temperature grease for extended bearing life. FatBoy bearings have an increased size to improve bearing life. Since the number one failure in a lawnmower clutch is the pulley bearing, the FatBoy uses top grade bearings and a replaceable pulley bearing.
- Replaceable pulley bearings - since the pulley bearings can eventually wear out, the Xtreme design offers replaceable bearings (not all clutches have this feature).
- Super smooth "Xtreme Precision" machined pulleys - result in stronger, quieter, smoother performance, while maintaining stable and faster blade speeds. These type of pulleys are used on Nascar engines since they don't spread under load like cheaper formed pulleys. If a formed pulley spreads, the belt will sink deeper into the groove, lowering belt speed and slowing down blades.
- Integrated, watertight, impact-resistant wire harnesses - Xtreme clutches have integrated watertight connections with three layers of protection at the clutch body instead of flimsy plastic connectors with exposed wires.
Part # | Replaces Exmark OEM # | Replaces Warner # | Replaces Xtreme # | ID | Pulley Diameter | Direction | Uses Belt Width |
---|---|---|---|---|---|---|---|
255-207X | 109-9282 / 116-1604 / 116-1620 Fits Lazer Z S, E, X series (serial # 312,000 and higher); Next Lazer Z, air cooled (serial # 790,000 and higher); Next Lazer Z ASX (serial # 850,000 and higher); Quest SP (serial # 850,000 and higher) |
5218-207 | X0239 | 1 1/8" | 7 3/16" | Counterclockwise | 1/2" or 5/8" |
255-243X | 103-3131 / 103-3245 / 103-6590 Fits Lazer Z AC (serial # 440,000 and higher); Lazer Z AS (serial # 440,000-669,999) |
5218-100 5218-228 5218-243 |
X0257 | 1" | 7 3/16" | Clockwise | 1/2" or 5/8" |
255-323X | 116277 | 5210-34 5210-50 5215-88 |
X0196 | 1" | 5 5/16" | Clockwise | 1/2" or 5/8" |
255-331X | 94-6136 | 5218-10 5218-223 |
X0041 | 1 1/8" | 5 3/8" | Counterclockwise | 1/2" or 5/8" |
255-383X | 1-601979 / 1-603463 / 1-603539 / 1-611190 / 1-611223 / 601979 / 603463 / 603539 / 611190 / 611223 Fits early Turf Ranger 1800; 5-speed Turf Tracer (serial # 89,999 and lower); Turf Tracer Hydro (serial # 70,000-129,999); Turf Tracer Hydro (serial # 190,000-319,999) |
5215-13 5215-99 |
X0165 | 1" | 6" | Clockwise | 1/2" or 5/8" |
255-387X | 1-541001 / 1-541003 / 1-541050 / 1-541353 / 1-542322 / 1-543259 / 1-543860 / 1-543862 / 1-551054 / 541001 / 541003 / 541050 / 542322 / 543259 / 543860 / 543862 / 551054 |
5215-14 | X0168 | 1" | 6" | Counterclockwise | 1/2" or 5/8" |
255-399X | 1-631644 / 1-631731 / 1-633098 / 103-0500 / 103-0661 / 103-0662 / 631644 / 631731 / 633098 / E631644 / E631731 / E633098 Fits Lazer Z w/ 18-23 HP Kohler engines (serial # 789,999 and lower); Lazer Z w/ 27-30 HP Kohler engines (serial # 370,000 and higher); Turf Tracer Hydro (serial # 320,000 and higher); Turf Tracer S (serial # 920,000 and higher); Turf Tracer X (serial # 920,000 and higher) |
5218-21 5218-25 5218-76 5218-76C 5218-293 |
X0042 | 1" | 6 5/16" | Clockwise | 1/2" or 5/8" |
255-511X | 104-3334 Fits Quest 42" decks (serial # 790,000 and higher) |
5217-6 5217-7 5217-9 5217-35 |
X0003 | 1" | 5 3/8" | Counterclockwise | 1/2" or 5/8" |
255-527X | 1-641212 / 1-641300 / 103-0663 / 641212 / 641300 |
Ogura GT2.5-MC04 MA-GT-EXM14 |
X0616 | 1 1/8" | 6" | Clockwise | 1/2" or 5/8" |
255-535X | 1-631645 / 1-633099 / 103-0664 / 631645 / 633099 / E633099 Fits Lazer Z 25 HP (serial # 159,999 and lower) |
5218-5 5218-259 |
X0015 | 1 1/8" | 6 5/16" | Clockwise | 1/2" or 5/8" |
255-552X | 1-631732 / 103-0501 / 103-0665 / 631732 / E631732 |
5218-65 5218-65E 5218-213 |
X0049 | 1 1/8" | 6 5/16" | Clockwise | 1/2" or 5/8" |
255-560X | 1-653048 / 1-653292 / 103-0690 / 105-3630 / 109-2916 / 109-9276 / 653048 / 653292 / E653048 / E653292 Fits Lazer Z HP (serial # 160,000 and higher) - Not for 27 HP models |
5218-44 5218-80 5218-80C 5218-201 5218-215 |
X0017 | 1" | 7 3/16" | Counterclockwise | 1/2" or 5/8" |
255-721X | 104-3624 / 109-7035 | 5219-13 | X0138 | 1" | 7 1/4" | Counterclockwise | 1/2" or 5/8" |
255-723X | 103-2453 / 103-3244 / 103-6589 / 109-7666 Fits Lazer Z XS (serial # 440,000 and higher); Lazer Z AS (serial # 720,000-789,999); Lazer Z w/ Kawasaki engines (serial # 370,000 and higher) |
5218-101 5218-217 |
X0460 | 1 1/8" | 7 1/8" | Clockwise | 1/2" or 5/8" |
255-727X | 103-3132 / 103-3246 / 103-4000 / 103-4057 / 103-5835 / 103-6579 / 109-7665 / 109-7673 / 116-1611 |
5218-99 5218-168 5218-202 5218-209 |
X0461 | 1 1/8" | 7 1/8" | Clockwise | 1/2" or 5/8" |
255-777X | 109-9275 Fits Lazer Z HP (serial # 720,000 and higher) |
5218-107 5218-140 5218-253 |
X0459 | 1 1/8" | 7 3/16" | Counterclockwise | 1/2" or 5/8" |
255-803X | 103-0281 / 103-1364 Fits Lazer Z w/ Kawasaki engines (serial # 260,000-369,999); Lazer Z liquid-cooled (serial # 260,000-369,999) |
5218-73 | X0314 | 1 1/8" | 6 5/16" | Clockwise | 1/2" or 5/8" |
255-811X | 103-0011 / 103-0083 / 109-6626 / 109-6627 | 5218-161 5218-206 |
X0238 | 1 1/8" | 6 7/16" | Clockwise | Double A |
255-823X | 110-6766 Fits Quest models w/ 48" and 52" decks (serial # 790,000 and higher) |
5219-81 | X0379 | 1" | 6 5/16" | Counterclockwise | 1/2" or 5/8" |