Hypro 90A2CM Series Even Flat Fan Nozzles are available in a wide variety of sizes and outputs. Also known as Lurmark Even Flat Fan Nozzles and Fanjet - Even Flat Fan PVDF Nozzle
These nozzles have a 65 degree pattern, the output is indicated by the numbers just in front of the "E" in the part number. (i.e. 90A2CM20E65 would mean 2.0 gallons per minute at 40 psi and the 90A2CM04E65 would be a 0.4 gpm spray tip).
These nozzles are no longer color coded and now come in a grey color. The remaining color-coded nozzles that are in stock will be shipped first, and once they run out, only the new grey versions will be available.
The thread is 1/4" (6.5 mm) male national pipe thread. If you measure the outside of the thread, it will appear to be just under 1/2" (13 mm). If you want a better explanation of National Pipe Thread, I would recommend Wikipedia.org as a source of an accurate information. You can screw these spray tips directly into a pipe. Many car washes uses these nozzles and you will find them in many industrial applications.
This nozzle is very common for industrial or commercial uses. Found in many car washes for example.
- Spray Angle: 65 degrees
- Made with polyvinylidene fluoride (PVDF) polymer
- Pressures up to 500 PSI (34.5 bar)
- 1/4" (6.5 mm) male NPT thread
Please check the Related Information section for a capacity chart pertaining to these Hypro 65 degree spray tips.