This low pressure diaphragm pump is recommended for ground and low-level spraying of herbicides, pesticides.
The D135 has 3 Diaphragms: 34.8 gpm (131.7 lpm); 290 psi (20 bar).
Low cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs. Pressure and output are designed for optimum performance of medium to large sized sprayers.
This Hypro Pump does not come with mounting feet or bracket, order 9910-580080 for the mounting plate.
The Hypro D135 Diaphragm Pump is designed to be the most complete pump for the spraying and pumping of herbicides, pesticides, liquid fertilizers and hard-to-handle fluids.
This Hypro diaphragm pump offers a wide spectrum of flows and pressures for slurries and suspensions. The oil bath design and premium-quality, synthetic diaphragms provide longer life and greater reliability. Low-cost maintenance and almost wear-free operation result from these diaphragms, as well as a self-priming operation, and visual oil-level sight glass.
This Hypro D135 Diaphragm Pump can handle fluids up to 140 degrees Fahrenheit and can be run dry. Easily adaptable to PTO, hydraulic or gas engine drives.
- Max. Flow: 33.9 GPM (128.3 LPM)
- Max. Pressure: 290 PSI (20 bar)
- Max. Rated Speed: 550 RPM
- Max. Fluid Temperature: 140 degrees Fahrenheit (60 degrees Celsius)
- Port Sizes: 1-1/2" (38 mm) HB inlet, 1" (25 mm) HB outlet
- Diaphragms: 3, semi-hydraulic
- Housing components for liquid handling: epoxy-coated
- Pump Shaft: 1-3/8" (35 mm) - 6 splined male shaft (35 mm)
- Pump Shaft Rotation: CW and CCW
- Weight: 38 lbs. (17.2 kg)
- Recommended Regulator for the D135: 3300-0087, 3300-0088
- Repair Kit for D135: 9910-KIT1721 (see Related Products)
Please visit the Related Information section for a useful manual and performance chart for the D135 Diaphragm Pump by Hypro.