The TeeJet Eductor Nozzle is commonly used to circulate large volumes of liquid in large sprayer tanks and ponds. NOTE: Large capacity centrifugal pumps are required to operate the Eductor Nozzle.
The model (2 mp) Eductor - 3/8" (9.5 mm) requires 16 G.P.M. (61 LPM) to operate at 30 psi (2.0 bar) if attached directly to a pump for pond circulation and a minimum of 3000 G.P.H. (11,360 LPH) pump is required. For spray tank circulation pump capacity should EXCEED 100 G.P.M. (378 LPM)
The model (4 mp) Eductor - 3/4" (19 mm) requires 23 G.P.M. (87 LPM) at 30 psi (2.0 bar) if attached directly to a pump for pond circulation, and a minimum of 5000 G.P.H. (18,930 LPH) is required. For spray tank circulation, pump capacity should EXCEED 160 G.P.M. (605 LPM)
- For ponds exceeding 2' deep (0.6 m)
- Creates a playful environment for Koi to enjoy and build muscles.
Please refer to the Capacity Chart in the Related Information section for more info.
|TeeJet Part #||Pipe Thread Inlet Connection||Orifice Diameter||Length||Diameter|
|Y33180-PP||4-1/16" (103 mm)||2-1/16" (52 mm)|
|Y9270-PP||6-3/8" (162 mm)||2-29/32" (74 mm)|
We use these in our rental pasture sprayers with a centrifugal pump. Really gets those dry products dissolved and/or in suspension quickly. Uses little enough water that it's no problem operating the sprayer with the agitation on.