Now you can easily create your own brine using rock salt and water with the BM-250 Brine Maker.
All you need to do is add your own rock salt and water to the tank and in just 30 minutes you will have 23.3% salt brine. Approximately 2.288 lbs. of salt will make 1 gallon of 23.3% sodium chloride brine. In less than one hour, the BM-250 will make approximately 250 US gallons of sodium chloride brine.
The BM-250 is a single tank unit with one 500 US gallon mixing / storage tank. Its 2" poly pump and 900 Series Briggs & Stratton engine (which powers the pump) are both mounted on a retractable slide out tray. The rock salt will be dissolved via powerful jets inside the poly tank. Included is a hydrometer to test out the finished product.
One of the benefits of making your own salt brine is that it costs less than 10 cents per gallon, which is a fraction of what you would pay buying ready-to-spray liquid deicers. You can also make your own hot brine good to 5 degrees for as little as 20 cents per gallon by adding 10% liquid calcium chloride to your salt brine.
How to use: Add your rock salt and water to the tank. Turn on the unit and let it run until your brine measures 23.3%. Then you can pump the salt brine to your storage tank or de-icing unit.
Unloading/transfer hose is not included.
You can use bagged, bulk, or sea salt with this unit.
Powder coated frame with fork slots makes it easier to move around.
Available in gas or electric. The BM-250-E unit is equipped with a 220 volt single phase electric driven pump in instead of a gas engine.
Please call for shipping rates.
Write Your Own Review
You might prefer
Starting at: USD $4,361.41