Overview

These Electric PTO Clutches are designed for rugged use and made for residential and commercial applications are excellent for Hustler Mowers.

Electric PTO Clutches for Hustler Mowers

Electric PTO Clutch
USD $593.29
  • SKU: 255-552
Electric PTO Clutch
USD $533.21
  • SKU: 255-553
Electric PTO Clutch
USD $407.11
  • SKU: 255-642
Electric PTO Clutch - Warner 5228-14
USD $1,116.00
  • SKU: 255-785
Electric PTO Clutch
USD $244.39
  • SKU: 255-867
  • Privacy Guaranteed
  • Secure Payment
  • Visa
  • Mastercard
  • Amex
  • PayPal
  • PayPal
  • Sezzle
Prices are in US Dollars.

Overview

These Electric PTO Clutches are designed for rugged use and made for residential and commercial applications are excellent for Hustler Mowers.

Product Description

These Stens Electric PTO Clutches are OEM spec and replaces Hustler PTO Clutches. They are designed for rugged use and made for residential and commercial applications. These PTO clutches have a One Year Warranty and are maintenance and adjustment free.

You must match up your existing PTO Clutch reference number exactly to the corresponding replacement Electric PTO Clutch. For proper ordering reference Hustler & Warner Part No. below in the chart.

Item # Replaces
Hustler #
Replaces
Warner #
ID HT Pulley
Dia.
Direction Uses Belt
Width
255-552 787366 / 787366K 5218-65E / 5218-213 1 1/8" 3 5/8" 6 5/16" Clockwise 5/8"
255-553 781039 / 781039K /
787408
5218-110 / 5218-219 1 1/8" 3 5/16" 6 1/4" Counter Clockwise 1/2" or 5/8"
255-642 601311 / 601311K /
787366 / 787366K
5218-154 / 5218-222 1 1/8" 3 5/16" 6 5/16" Clockwise 5/8"
255-785 601278 / 601278K 5228-14 / 5228-53 / 5228-57 1 1/8" 3 5/8" 7 1/4" Clockwise 5/8"
255-867 604713K 5219-164 1" 3 15/16" 6" Counter Clockwise 1/2" or 5/8"

Important:

If a clutch is mounted incorrectly then the springs will be run in compression and it will cause the springs to fail.

Generally, most applications that mount directly to the crankshaft use a counter clockwise rotation for standard mount (pulley away from engine). A clockwise rotation is normally used for reverse mounting (pulley towards engine).

In order for your PTO clutch to be installed properly you must torque correctly to prevent premature failure. You must allow both axial and radial free-play on the anti-rotation device. You must allow this free-play or resistance will be created resulting in field bearing failure.

When mounting bolt and retaining washer and torque for the clutch follow these specs. for it to work properly.

  1. Use Grade 5 or Grade 8 bolt only

Minimum Torque:

  1. 7/16" UNF bolt is 50ftlb/67 Nm
  2. 3/8" UNF bolt is 31ftlb/42 Nm
  3. M10x1.5 bolt is 35ftlb/48 Nm

Anything less than required mounting torque could result in clutch failure, thus voiding warranty.

Related Products