Overview
Replace PTO clutches on many of your MTD mowers and garden tractors with the Stens line of Xtreme PTO Clutches.
Xtreme Electric PTO Clutches for MTD Mowers
Prices are in US Dollars.
Overview
Replace PTO clutches on many of your MTD mowers and garden tractors with the Stens line of Xtreme PTO Clutches.
Product Description
Replace PTO clutches on your MTD lawn mowers and garden tractors with the Stens line of Xtreme PTO Clutches. These electric PTO clutches can be used to replace some Warner, Ogura, and Xtreme PTO clutches as well.
The Xtreme line of electric PTO clutches by Stens feature the following to increase clutch life:
- Cool coil technology - runs over 20% cooler than competitive clutches. Electromagnetic clutches run very hot, up to around 220° F. Xtreme composite coils run around 175° F. Less heat means extended life.
- High temperature bearing upgrades OR FatBoy bearing upgrades - high temperature bearings use a special blend of grease rated two times more than what is required for extended bearing life. Since high temperatures and vibration are tough on bearings, all Xtreme clutches use this blend of high temperature grease for extended bearing life. FatBoy bearings have an increased size to improve bearing life. Since the number one failure in a lawnmower clutch is the pulley bearing, the FatBoy uses top grade bearings and a replaceable pulley bearing.
- Replaceable pulley bearings - since the pulley bearings can eventually wear out, the Xtreme design offers replaceable bearings (not all clutches have this feature).
- Super smooth "Xtreme Precision" machined pulleys - result in stronger, quieter, smoother performance, while maintaining stable and faster blade speeds. These type of pulleys are used on Nascar engines since they don't spread under load like cheaper formed pulleys. If a formed pulley spreads, the belt will sink deeper into the groove, lowering belt speed and slowing down blades.
- Integrated, watertight, impact-resistant wire harnesses - Xtreme clutches have integrated watertight connections with three layers of protection at the clutch body instead of flimsy plastic connectors with exposed wires.
Part # | Replaces MTD OEM # | Replaces Warner / Ogura # |
Replaces Xtreme # | ID | Pulley Diameter | Direction | Uses Belt Width |
---|---|---|---|---|---|---|---|
255-285X | 717-04163 / 717-04163A / 917-04163 / 917-04163A | 5217-32 5217-43 |
X0013 | 1" | 6" | Counterclockwise | 1/2" or 5/8" |
255-289X | 717-04174 / 717-04174A / 917-04174 / 917-04174A Fits 800, GT, L, RTZ, and SLT models |
5219-51 5219-64 5219-79 |
X0008 | 1" | 6" | Counterclockwise | 1/2" or 5/8" |
255-293X | 717-3385 / 717-3385A / 717-3385AP / 717-3385B / 917-3385 / 917-3385A / 917-3385B Fits 2000, 2130, 2135, 2138, 2143, 2145, 2150, 2155, 2165 |
5217-14 5217-42 |
X0014 | 1" | 5 3/8" | Counterclockwise | 1/2" or 5/8" |
255-295X | 050520 / 717-04183 / 717-04622 / 917-04183 / 917-04622 Fits ZT42, ZT50, ZT5000 |
5219-99 Ogura GT1A-MT09 |
X0391 | 1" | 5 5/8" | Counterclockwise | 1/2" or 5/8" |
255-297X | 717-1774 / 717-1774B / 717-1774C / 917-05001 / 917-1774 / 917-1774B / 917-1774C |
5219-25 | X0065 | 1" | 6" | Counterclockwise | 1/2" or 5/8" |
255-347X | 01000725 / 717-3375 / 717-3389 / 717-3389P / 917-3389 Fits MMZ-1848 |
5210-30 5215-68 |
X0188 | 1" | 6 1/16" | Counterclockwise | 1/2" or 5/8" |
255-351X | 717-0949 / 717-1434 / 917-0949 / 917-1434 | 5215-51 | X0184 | 1" | 5 5/16" | Counterclockwise | 1/2" or 5/8" |
255-419X | 717-3403 / 717-3403P / 917-3403 Fits 1863, 1864, 2086, 2176, 2185, 2186, 2206, 2284, 2518 garden tractors |
5218-6 | X0016 | 1 1/8" | 6" | Counterclockwise | 1/2" or 5/8" |
255-427X | 717-3044 / 917-3044 Fits 1050, 1204, 1210, 1211, 1535, 1541, 1710, 1806, 1810, 1811, 1812 garden tractors |
5209-41 | X0147 | 1 1/8" | 4 1/2" | Counterclockwise | 1/2" or 5/8" |
255-431X | 717-3446 / 717-3446P / 917-3446 Fits 2160, 2164, 2165 garden tractors |
5218-29 | X0037 | 1" | 6" | Counterclockwise | 1/2" or 5/8" |
255-435X | 717-3390 / 917-3390 Fits 2185 garden tractors and 365L, Z-54L, Z-180, Z-180L, Z-200 zero-turn mowers |
5215-69 5215-69U |
X0189 | 1 1/8" | 6" | Counterclockwise | 1/2" or 5/8" |
255-475X | 717-04080 / 917-04080 | 5215-142 | X0170 | 1" | 6" | Counterclockwise | 1/2" or 5/8" |
255-511X | 1772388 / 717-1459 / 917-1459 / GW-1772388 | 5217-6 5217-7 5217-9 5217-35 |
X0003 | 1" | 5 3/8" | Counterclockwise | 1/2" or 5/8" |
255-519X | C38410 / WD-C38410 | 5210-52 5215-62 5215-120 |
X0450 | 1 1/8" | 4 13/16" | Clockwise | 1/2" |
255-539X | 717-1708 / 917-1708 Fits 1170, 1515, 1517, 1527, 1600, 1800 lawn tractors |
5215-129 | X0164 | 1" | 5 5/16" | Counterclockwise | 1/2" or 5/8" |
255-543X | 717-1709 / 917-1709 | 5215-130 | X0166 | 1" | 5 5/16" | Counterclockwise | 1/2" or 5/8" |
255-547X | 717-0983 / 717-3497 / 917-0983 / 917-3497 | 5210-33 5215-59 |
X0185 | 1" | 5 5/16" | Counterclockwise | 1/2" or 5/8" |
255-793X | 717-3340 / 917-3340 Fits lawn tractors 1861 and 1862 (serial # 821,060-836,000) ; 1863 and 1864 (serial # 836,001-880,000) ; 2082 (serial # 821,060-836,000) ; 2084 (serial # 836,000-864,500) ; 2284 (serial # 864,501-899,000) |
5209-46 | X0148 | 1 1/8" | 6" | Counterclockwise | 1/2" or 5/8" |
255-795X | 02002160 / 02002160P | Ogura GT1-CT04 |
X0484 X0544 |
1 1/8" | 5 1/4" | Counterclockwise | 1/2" or 5/8" |
255-817X | 717-04180 / 917-04180 | 5219-52 | X0365 | 1 1/8" | 6" | Counterclockwise | 1/2" or 5/8" |
255-821X | 917-04376A Fits RTZ series and 17-Z series |
5217-44 | X0448 | 1" | 6" | Counterclockwise | 1/2" or 5/8" |
255-839X | 717-04552 / 717-04552A / 917-04552 / 917-04552A | 5219-98 | X0390 | 1" | 6" | Counterclockwise | 1/2" or 5/8" |
255-873X | 01008544 / 01008544P / 050615 | Ogura GT1-JD08 |
X0423 | 1" | 5 5/16" | Counterclockwise | 1/2" or 5/8" |