The Hypro Series 3350 Polypropylene Line Strainers are low-profile strainers mainly used for suction and low pressure applications, capable of achieving up to 80 psi at 70 degrees Fahrenheit. The line strainers / suction filters are designed to prevent debris from being drawn into the pump.
The caps and bowls on these line strainers are made with black polypropylene material for increased chemical resistance. The black polypropylene also provides a sleek and clean appearance throughout your sprayer.
Hypro Series 3350 Polypropylene Line Strainer Specifications:
- Rated for 80 psi @ 70° F (5.5 bar @ 21° C)
|Part #||NPT Threads||Cap||Bowl||Mesh Screen||O-Ring||Open Area|
|3350-0058A||1" female||Black Poly Cap
|Black Poly Bowl
|50 Mesh Stainless Steel
|13.5 sq. in|
Installation: In most cases, the line strainer should be installed on the inlet side of the pump. If installing on a centrifugal pump, the strainer can be installed on either the inlet or discharge side, depending on the strainer's flow capacity, pressure rating, and other installation factors. Liquid flow is indicated by the arrow molded in the strainer cap.
Cleaning: You can clean the strainer without removing it from the line. Unscrew the bowl from the cap and remove the screen. Flush any sediment from the screen. Then reassemble the strainer by fitting the screen to the flange in the bowl and turn the bowl hand tight, providing an adequate seal against the cap. Do not use for fatigue-loading applications, such as water softeners.
Write Your Own Review
You might prefer
Starting at: USD $14.33