The Shurflo 8000-541-236 Automatic Demand Pump is part of Shurflo's 8000 series line of diaphragm pumps. It can handle low flow, low pressure applications, making it an excellent lawn and garden pump to use on agricultural sprayers / spot sprayers on the farm or around the yard for heavy-duty spraying and fluid transfer applications.
Equipped with Viton valves for maximum chemical resistance, this Shurflo 8000-541-236 Automatic 12V Demand Pump can handle use with many common agricultural chemicals, including pesticides, herbicides, liquid fertilizers, insecticides, and other hard-to-handle fluids. The pump's unique cone-shaped valve design delivers flow rates at maximum discharge pressures, making it a great choice for agricultural spraying around the lawn and garden or on the farm.
Demand Pumps are used in applications where you require a set flow and pressure. For example, spray wands used on spot sprayers.
How Demand Pumps Work: When the spray wand is shut off by the user, pressure in the line increases to a set point and the pressure switch will shut off the motor. The check valve inside the pump keeps trapped pressure in the line. When the user decides to turn the spray wand back on, the pressure in the line decreases. Once pressure falls below the set point the pump will restart. Advantages to using a demand pump is it saves wear and tear on the pump and extends the service life of the battery.
Note: The Shurflo 8000-541-236 is the same as 8009-541-236.
- Max. Flow: 1.0 gpm
- Max. Pressure: 60 psi
- Max. Draw: 3.8 Amps
- Max. Fluid Temperature: 170° Fahrenheit
- Port Sizes: 3/8" female NPT
- Voltage: 12V DC nominal
- Self-priming up to 8' vertical
- Positive displacement 3-chamber diaphragm pump
- Can be run dry without damage
- With 60 psi demand switch
- Built-in check valve to prevent reverse flow
- Viton valves
- Santoprene diaphragm
- Zinc-plated steel fasteners
- Weight: 3.8 lbs.
NOTE: The Shurflo 8000-541-236 is interchangeable with the 8009-541-236 Pump. The part number 8000-541-236 is used when quantities of 6 are ordered from the manufacturer. For individual purchases from the manufacturer, the pump is referred to as an 8009-541-236. They are both the same exact pumps.
The TeeJet 122 Series Line Strainers can be used to help eliminate contaminates from running through your Demand Pump (see Related Products).
For more information about the Shurflo 8000-541-236 Automatic Demand Pump, please refer to the Related Information section for performance charts, manuals, etc.