Overview

Stens Replacement Electric PTO Clutches for Ariens Mowers are designed for rugged use and made for residential and commercial applications.

Electric PTO Clutches for Ariens Mowers

Electric PTO Clutch
USD $437.75
  • SKU: 255-331
Electric PTO Clutch
USD $388.87
  • SKU: 255-335
Electric PTO Clutch
USD $366.76
  • SKU: 255-511
PTO Clutch
USD $272.55
  • SKU: 255-515
Electric PTO Clutch
USD $469.46
  • SKU: 255-519
  • Privacy Guaranteed
  • Secure Payment
  • Visa
  • Mastercard
  • Amex
  • PayPal
  • PayPal
  • Sezzle
Prices are in US Dollars.

Overview

Stens Replacement Electric PTO Clutches for Ariens Mowers are designed for rugged use and made for residential and commercial applications.

Product Description

These Stens Electric PTO Clutches are OEM spec and replaces Ariens Mowers Clutches. They are designed for rugged use and made for residential and commercial applications. These PTO clutches have a One Year Warranty and are maintenance and adjustment free.

You must match up your existing PTO Clutch reference number exactly to the corresponding replacement Electric PTO Clutch. For proper ordering reference Ariens, Warner, or Ogura Part No. below in the chart.

Part # Replaces Ariens OEM Replaces
Warner #
ID HT Pulley
Diameter
Direction Uses Belt
Width
255-319 00554300 / 00574100 / 554300 / 574100 5218-27
5218-69
1" 3 13/16" 4 7/8" Clockwise 1/2"
255-323 03450500 / 050236 / 3450500 5210-34
5210-50
5215-88
1" 3 1/2" 5 3/8" Clockwise 1/2"
255-331 092026 / 092080 / 092254 / 09225400 5218-10
5218-223
1 1/8" 3 1/4" 5 3/8" Counter Clockwise 1/2" or 5/8"
255-335 09407700 5218-26
5218-58
5218-67
5218-68
5218-147
5218-214
5218-257
1 1/8" 3 1/2" 4 7/8" Clockwise 1/2"
255-511 03643100
Fits EZR 1540, 1648 and 1742 models
5217-6
5217-7
5217-9
5217-35
1" 3" 5 3/8" Counter Clockwise 1/2" or 5/8"
255-515 03601800
Fits EZR 1440, 1648 and 1540 models
5217-2
5217-40
5217-46
1" 3" 5 3/8" Counter Clockwise 1/2"
255-519 03090800 / 30908 5210-52
5215-120
5215-62
1 1/8" 3 3/4" 5" Clockwise 1/2"
255-627 00389900 / 09266700 / 09232700 / 09208000 5218-169
5218-31
5218-94
1 1/8" 3 1/4" 6" Counter Clockwise 1/2" or 5/8"

Important:

If a clutch is mounted incorrectly then the springs will be run in compression and it will cause the springs to fail.

Generally, most applications that mount directly to the crankshaft use a counter clockwise rotation for standard mount (pulley away from engine). A clockwise rotation is normally used for reverse mounting (pulley towards engine).

In order for your PTO clutch to be installed properly you must torque correctly to prevent premature failure. You must allow both axial and radial free-play on the anti-rotation device. You must allow this free-play or resistance will be created resulting in field bearing failure.

When mounting bolt and retaining washer and torque for the clutch follow these specs. for it to work properly.

  • Use Grade 5 or Grade 8 bolt only

Minimum Torque:

  • 7/16" UNF bolt is 50ftlb/67 Nm
  • 3/8" UNF bolt is 31ftlb/42 Nm
  • M10x1.5 bolt is 35ftlb/48 Nm

Anything less than required mounting torque could result in clutch failure, thus voiding warranty.

Related Products